RunCam WifiLink2

Latest Firmware

WiFiLink_Ruby V10.7(b269):

  • 1. WiFiLink_Ruby V10.7(b269)

WiFiLink_V2.8:

  • 1. Add an audio status light. The green light will always be on after turning on the audio, otherwise it will be turned off.
  • 2. Added a new recording status light, and the green light flashes slowly after turning on the recording (1 second)
  • 3. Add STBC, LDPC and MCS card configurations
  • 4. OSD default msp
  • 5. Update to the official latest SDK
  • HOW TO UPDATE?
  • The classic method (manually copy the firmware file onto the SD card).
  • (Note: Do not power off or remove the SD card during the firmware upgrade process.)
  • 1.Copy the “WiFiLink-part0.bin” and “WiFiLink-part1.bin” card flashing files to the root directory of an empty SD card.
  • 2. Insert the SD card into the camera's main board and power it on. The camera will automatically enter upgrade mode (about 15 seconds).
  • 3. Once the upgrade is complete (about 1 minute), the green light will turn off and the SD card content will be cleared. After re-powering, a new configuration file (“gs.key” and “user”) will be generated on the SD card.

Download

Looking for previous versions?

User Manual