RunCam WifiLink Firmware V1.8:

• 1.Fixed some bugs.

• HOW TO UPDATE?

The classic method (manually copy the firmware file onto the SD card).

• (Note: Do not power off or remove the SD card during the firmware upgrade process.)
• 1.Copy the “WiFiLink-part0.bin” and “WiFiLink-part1.bin” card flashing files to the root directory of an empty SD card.
• 2. Insert the SD card into the camera's main board and power it on. The camera will automatically enter upgrade mode (about 15 seconds).
• 3. Once the upgrade is complete (about 1 minute), the green light will stay on and the SD card content will be cleared. After re-powering, a new configuration file (“gs.key” and “user”) will be generated on the SD card.